Purpose & when to use

Computational Fluid Dynamics (CFD) uses numerical simulation and measured validation data to predict airflow, mixing, pressure fields, and aerosol transport. ARE Labs combines CAD geometry, chamber decay datasets, particle size inputs, and boundary-condition records to support design and safety decisions. Studies draw on ISO 17025 quality practices, FDA CFD guidance, ASHRAE 90.1 energy context, and ICH Q9 risk framing. Use CFD when:

  1. Room air-cleaner placement and ventilation comparisons where ASHRAE 90.1 boundary conditions shape whole-room mixing, bypass risk, and occupant exposure estimates.
  2. Spray or inhalation device plume studies where FDA CFD guidance supports geometry-specific predictions before focused bench validation under ISO 17025 controls.
  3. Medical-device inlet, outlet, fan, or baffle revisions where 21 CFR Part 820 design controls require traceable scenario comparisons and sensitivity rationale.
  4. Chamber-test translation where ISO 17025 decay measurements calibrate CFD predictions for real rooms, ducts, or enclosures under ICH Q9 risk framing.
  5. Aerosol deposition and residence-time mapping where NIST sensitivity-analysis methods and ISO 17025 validation data identify which particle size, surface, or turbulence assumptions drive conclusions.

Use CFD to extend physical test data across geometries and scenarios that a test program does not cover directly. The model identifies which inputs most affect results, narrows prototype options, and documents uncertainty before final validation testing.

Built for air, aerosol, device, and chamber programs

CFD supports product and facility questions where airflow geometry changes the outcome, from air-treatment systems and aerosol devices to medical-device housings and exposure chambers under ISO 17025 and FDA-aligned validation plans.

  • Air treatmentRoom and duct airflow systems
  • Spray aerosolPlumes, jets, and deposition
  • Medical deviceHousings, fans, and outlets
  • Inhalation productAerosol transport and delivery
  • RoomsChambers, enclosures, and ventilation

Instrumentation & measurement ranges

We use measured inputs, controlled geometry, mesh checks, and validation datasets to build credible CFD models.

1 - 10000 sdecay-time

Chamber validation datasets

Measured concentration decay, flow rate, pressure, and particle size data calibrate the model and bound agreement against physical chamber results.

0.01 - 100 mgeometry-scale

Geometry and boundary-condition capture

CAD, measured openings, fan curves, inlet profiles, heat loads, and leakage assumptions define the simulation domain and documented applicability limits.

0.001 - 1000 m/svelocity

Micro-to-room CFD models

Component-scale jets, outlet plumes, ducts, rooms, and open configurations are modeled with turbulence and particle approaches matched to the decision.

Test method options

MethodStrengthsTradeoffAligned with
Room-scale dispersion and mixing model
  • Ranks placement and ventilation choices using ASHRAE 90.1 boundary-condition context.
  • Maps concentration, residence time, and bypass zones for room or chamber scenarios.
Furniture, leakage, and supply profiles can dominate results if poorly defined.
ASHRAE 90.1NIST Sensitivity Methods
Device internal flow and outlet jet model
  • Compares fans, baffles, inlets, seals, and housings before prototype builds.
  • Supports FDA CFD guidance and 21 CFR Part 820 design-control files.
Fan curves, porous media, and mesh resolution usually set the schedule.
FDA CFD Guidance21 CFR Part 820
Aerosol transport and deposition modeling
  • Predicts hot spots, surface deposition, and particle residence time by size band.
  • Pairs ISO 17025 chamber data with geometry-specific aerosol transport predictions.
Deposition is sensitive to particle properties, wall functions, and near-wall mesh.
ISO 17025NIST Sensitivity Methods
Model calibration with chamber data
  • Uses measured decay curves and flow records to reduce unsupported model assumptions.
  • Frames validation acceptance and residual uncertainty under ICH Q9 risk logic.
Requires a defined validation dataset before claims can be bounded.
ISO 17025ICH Q9

Setup configurations

A CFD study starts with the decision the model needs to support. We then establish the geometry, boundary conditions, validation data, and sensitivity plan before modeling begins. The setup balances model fidelity with uncertainty that customers can reduce through measurement, design changes, or clearer scenario definitions. The dimensions below shape the modeling plan:

Device interfaces

CAD geometry, measured openings, internal passages, seals, filters, and source locations define the simulation domain and what simplifications are allowed.

Flow & actuation profiles

Ventilation rates, fan curves, inlet profiles, release rates, heat loads, duty cycles, and leakage assumptions are documented before solver setup.

Calibration & verification

Measured decay curves, flow checks, particle size distributions, pressure data, and acceptance criteria establish how the model will be judged.

Environmental controls

Temperature, humidity, background mixing, surface conditions, and chamber or room operating state are captured when they affect transport or deposition.

Sample numbers

Scenario counts and sensitivity runs are planned around the design choices, uncertainty drivers, and risk decisions the model must compare.

Modeling anchored to measured validation evidence

CFD studies follow a documented quality system. We select regulatory and engineering frameworks for the model's intended use, then use the references below to guide how we report assumptions, validation, and sensitivity evidence.

  • ISO 17025AccreditedLaboratory competence - documented methods, traceable measurements, and uncertainty contributors.
  • ASHRAE 90.1AlignedBuilding energy context - ventilation and boundary conditions for room models.
  • FDA CFD GuidanceAlignedMedical-device modeling expectations - verification, validation, and applicability limits.
  • ICH Q9AlignedQuality-risk framing - assumptions ranked by decision impact.

Key data outputs & reporting

Each CFD study delivers decision outputs from the model files, validation evidence, and a discussion of uncertainty. Results include velocity fields, pressure maps, concentration histories, deposition indicators, and sensitivity rankings, formatted for design reviews, risk files, or validation packages. The deliverables below describe the standard report. Extended programs comparing multiple geometries or operating modes receive additional scenario artifacts.

Primary outputs

  • Velocity fields, pressure maps, streamlines, and recirculation regions for the modeled geometry and operating conditions.
  • Aerosol concentration maps versus time and location, including residence-time and clearance indicators for each scenario.
  • Deposition and hot-spot summaries tied to particle size, surface assumptions, and near-wall model choices.
  • Validation plots comparing simulated results with measured decay, concentration, flow, or pressure data.

Deliverables

#FormatContents
01PDF reportAssumptions, model setup, validation evidence, findings, and uncertainty limits.
02CSV / XLSX datasetsScenario metrics, sensitivity tables, and validation comparison data.
03Figures and animationsStreamlines, contours, concentration maps, and review-ready visual exports.
Extended deliverables · multi-arm comparability · stability · predicate studies
  • Scenario comparison pack — Ranked performance deltas across placements, geometries, flow rates, or operating modes.
  • Sensitivity appendix — Mesh, boundary-condition, turbulence, and particle-size assumptions ranked by effect on conclusions.

QA / QC & data integrity

Each CFD study includes documented QA / QC controls matched to the model's purpose, measured inputs, and decision risk. We track geometry versions and solver settings, check the mesh, and review convergence. Under the ISO 17025 quality system, we maintain traceability from measured validation datasets to final scenario metrics.

Version control for geometry, mesh, solver settings, source terms, boundary conditions, and analysis exports.

Mesh independence checks sized to the decision, with convergence criteria and residual behavior documented.

Traceability from chamber or device measurements to model inputs, calibration targets, and validation plots.

Sensitivity studies for ventilation, leakage, particle size, placement, turbulence model, and release assumptions.

Applicability limits stated in the report, including where physical testing remains required for final validation.

Why ARE Labs

ARE Labs connects technical topics to practical study design, method selection, controlled aerosol work, and reportable evidence without turning technical pages into sales pages.

Reviewed byJamie Balarashti (25 yrs - cascade & inhalation methods) - Weston Schaper (7 yrs - real-time sizing & nanoparticle work)
17025Accredited testing
900+Studies Performed
17+Years in operation
300+Clients supported

Common questions

The questions below cover the data needed for a CFD study, validation, sensitivity studies, and reporting. They address initial planning questions from air-treatment engineers, aerosol-device teams, medical-device developers, and facility stakeholders. Contact us to discuss your geometry, release condition, or regulatory frame, including details that differ from the examples here, so we can scope the study around your project.

Q.Do you run CFD without measurements?
A.Yes. We recommend at least one validation dataset, such as chamber decay, flow mapping, pressure, or particle concentration data, to help build a defensible calibrated model. Comparing predictions with measurements lets us document how closely the model agrees with the data and where its limits lie.
Q.What information do you need to start?
A.We need geometry or CAD, operating flows or fan curves, source definitions, particle size inputs, and the decision the model must support. For room studies, ventilation layout and obstruction assumptions are also important.
Q.Can you predict deposition on surfaces?
A.Yes. We build the model around the deposition question. Deposition depends on particle size, surface properties, the turbulence model, and the near-wall mesh. We report the assumptions and uncertainty alongside the deposition predictions.
Q.What determines model accuracy most?
A.Boundary conditions, geometry fidelity, turbulence model choice, particle properties, and validation quality usually dominate accuracy. Sensitivity runs identify which assumptions change the decision and which have little practical effect.
Q.What do I receive?
A.You receive a PDF report, scenario metrics, validation comparisons, sensitivity tables, and figures or animations for design reviews. Native CFD model files are available on request.